Search Results
Results 1 to 25 out of 995
| Name | Type | Description | Download |
|---|---|---|---|
| Tariff Selection-Time and Date Dependant | Ruby measure | This measure sets flat rates for gas, water, district heating, and district cooling but has on seasonal and off peak rates for electricity. It exposes inputs for the time of day and day of year where peak rates should be applied. Repo: NatLabRockies/openstudio-common-measures-gem |
download Tariff Selection-Time and Date Dependant |
| Tariff Selection-Flat | Ruby measure | This measure sets flat rates for electricity, gas, water, district heating, and district cooling. Repo: NatLabRockies/openstudio-common-measures-gem |
download Tariff Selection-Flat |
| Tariff Selection-Block | Ruby measure | This measure sets block rates for electricity, and flat rates for gas, water, district heating, and district cooling. Repo: NatLabRockies/openstudio-common-measures-gem |
download Tariff Selection-Block |
| OpenStudio Results | Ruby measure | This measure creates high level tables and charts pulling both from model inputs and EnergyPlus results. It has building level information as well as detail on space types, thermal zones, HVAC systems, envelope characteristics, and economics. Click the heading above a chart to view a table of... Repo: NatLabRockies/openstudio-common-measures-gem |
download OpenStudio Results |
| Generic QAQC | Ruby measure | This measure extracts key simulation results and performs basic model QAQC checks. Each category of checks provides a description of the source of the check. In some cases the target standards and tollerances are adjustable. Repo: NatLabRockies/openstudio-common-measures-gem |
download Generic QAQC |
| Envelope and Internal Load Breakdown | Ruby measure | Report provides annual and monthly views into heat gains and losses for envelope and internal loads. Repo: NatLabRockies/openstudio-common-measures-gem |
download Envelope and Internal Load Breakdown |
| HVAC Psychrometric Chart | Ruby measure | A psychrometric chart shows the relationship between air temperature and humidity conditions. Repo: NatLabRockies/openstudio-common-measures-gem |
download HVAC Psychrometric Chart |
| Example Report | Ruby measure | Simple example of modular code to create tables and charts in OpenStudio reporting measures. This is not meant to use as is, it is an example to help with reporting measure development. Repo: NatLabRockies/openstudio-common-measures-gem |
download Example Report |
| Replace Thermostat Schedules | Ruby measure | Replace zone thermostat schedules with other schedules in the same file. If a zone does not have a thermostat this measure will not add one. Repo: NatLabRockies/openstudio-common-measures-gem |
download Replace Thermostat Schedules |
| Set Run Period Object | Ruby measure | Set Run Period Object Repo: NatLabRockies/openstudio-common-measures-gem |
download Set Run Period Object |
| SwapLightsDefinition | Ruby measure | This measure will swap out one lights definition for another. All objects that had referred to the original definition will now refer to the new one. Repo: NatLabRockies/openstudio-common-measures-gem |
download SwapLightsDefinition |
| XcelEDATariffSelectionandModelSetup | Ruby measure | Add the selected Xcel utility rate, as well as set the timestep and lifecycle costing parameters as required by the Xcel EDA program. Repo: NatLabRockies/openstudio-common-measures-gem |
download XcelEDATariffSelectionandModelSetup |
| Set Exterior Walls and Floors to Adiabatic | Ruby measure | Set exterior or ground walls, floors, and roofs to Adiabatic and assign a hard construction. Can specify through bool arguments exterior orientation for walls, as well as floors and roofs. Repo: NatLabRockies/openstudio-common-measures-gem |
download Set Exterior Walls and Floors to Adiabatic |
| Simulation Control | Ruby measure | This measures sets the fields of the SimulationControl object. Repo: NatLabRockies/openstudio-common-measures-gem |
download Simulation Control |
| Tariff Selection-Generic | Ruby measure | This measure will add pre defined tariffs from IDF files in the resrouce directory for this measure. Repo: NatLabRockies/openstudio-common-measures-gem |
download Tariff Selection-Generic |
| Add Cost per Floor Area to Unused Lights | Ruby measure | This measure is the same as 'Add Cost per Floor Area to Electric Lights' except that it only offers lights definitions that are not used in the model. Repo: NatLabRockies/openstudio-common-measures-gem |
download Add Cost per Floor Area to Unused Lights |
| Add Output Variable | Ruby measure | This measure adds an output variable at the requested reporting frequency. Repo: NatLabRockies/openstudio-common-measures-gem |
download Add Output Variable |
| AddThermalComfortModelTypes | Ruby measure | Adds to the model (A) any of the available thermal comfort model types, and (B) work efficiency, clothing insulation, and air velocity constant schedules. Repo: NatLabRockies/openstudio-common-measures-gem |
download AddThermalComfortModelTypes |
| MeterFloodPlot | Ruby measure | This measures generates a flood plot of the requested meter. Repo: NatLabRockies/openstudio-common-measures-gem |
download MeterFloodPlot |
| Predicted Mean Vote | Ruby measure | This measure adds the necessary data to people objects to support Predicted Mean Vote output data. It also adds the variable request. Repo: NatLabRockies/openstudio-common-measures-gem |
download Predicted Mean Vote |
| Replace Exterior Window Constructions with a Different Construction from the Model. | Ruby measure | Replace existing windows with different windows to change thermal or lighting performance. Window technology has improved drastically over the years, and double or triple-pane high performance windows currently on the market can cut down on envelope loads greatly. Window frames with thermal... Repo: NatLabRockies/openstudio-common-measures-gem |
download Replace Exterior Window Constructions with a Different Construction from the Model. |
| Replace OpenStudio Model | Ruby measure | Repo: NatLabRockies/openstudio-common-measures-gem |
download Replace OpenStudio Model |
| Set COP for Single Speed DX Cooling Units | Ruby measure | This measure will find single speed DX cooling units in the model and will alter the Rated COP to a specified value. It can be run on a single or all air loops in the model. Repo: NatLabRockies/openstudio-common-measures-gem |
download Set COP for Single Speed DX Cooling Units |
| SetLifecycleCostParameters | Ruby measure | This measure sets the analysis type to "FEMP" and has an argument for the length of the study period in years. Repo: NatLabRockies/openstudio-common-measures-gem |
download SetLifecycleCostParameters |
| ShiftScheduleProfileTime | Ruby measure | Shift a single or all schedules in the building by the specified number of hours Repo: NatLabRockies/openstudio-common-measures-gem |
download ShiftScheduleProfileTime |